Mini Pleat filter Panel TROX MFP-ePM1-65%-PLA/310x440x96x80/WS
without gasket / Pleat depth: 80 mm
MINI PLEAT FILTER PANEL TYPE MFP
For the most demanding requirements of air cleanliness and sterility
Prefilters or final filters for the separation of fine dust and suspended particles. Used for industrial, research, medical, pharmaceutical, and nuclear engineering applications.
- Filter groups ISO ePM10, ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter)
- Performance data tested according to ISO 16890 or to EN 1822-1 and ISO 29463-2 to ISO 29463-5
- Eurovent certification for fine dust filters
- Meets the hygiene requirements of VDI 6022
- Filter media for special requirements, glass fibre papers with spacers made of thermoplastic hot-melt adhesive
- Low initial differential pressure due to ideal pleat position and largest possible filter area
- Perfect adjustment to individual requirements due to different pleat depths, filter frame made of various materials
- Fitting into ceiling mounted or wall mounted particulate filters (types TFC, TFW, TFM, TFP), ducted particulate filters
(types KSF, KSFS), duct casings for particulate filters (type DCA), or operating theatre ceilings
- Atomatic filter scan test for all filters from filter class H14
References
MFP-ePM1-65%-PLA/310x440x96x80/WS / MFPePM165%PLA310x440x96x80WS
Technical information
Classification according to ISO 16890: ePM1
Efficiency: 65 %
Frame material: PLA
Volume flow rate [m³/h]: 1190
Initial differential pressure [Pa]: 110
Width: 310 mm
Height: 440 mm
Depth: 96 mm
Pleat depth: 80 mm