Burner contr.unit, S 300 Kromschröder BCU 370WI1FEU0D1B1-3
Burner control unit, series 300
Burner control unit, series 300 88600018 , BCU 370WI1FEU0D1B1-3
Housing for on-site mounting, for controlling, igniting and monitoring modulating gas burners. For continuous operation with ionization control or UV control using UV sensor UVD. Intermittent operation with UV sensor UVS. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EU certified. AGA approved.
Market: European market, EC type tested and certified
Mains voltage: 230 V~, 50/60 Hz
Electronic ignition: Single-pole
Fan control: 3 A relay
Valve control: Three-point step
Flame control: Ionization control (continuous or intermittent operation) or UV control (intermittent operation with UVS)
Digital input function: DGmax. monitoring
Fieldbus interface: PROFIBUS DP
Bus control: Three-point step
Electrical connection: With bottom section
11 Minimum burner pause time tBP: 0 s
07 Burner start-up attempts: 3
22 Switch-on delay time tE: 0 s
21 Pre-ignition time tVZ: 1 s
12 Safety time 1, burner/pilot burner start-up tSA1: 3 s
13 Flame proving period 1, burner/pilot tFS1: 2 s
14 Safety time 2, main burner start-up tSA2: 0 s
15 Flame proving period 2, main burner tFS2: 0 s
29 Controller enable signal delay time tRF: 0 s
10 Minimum burner on time tB: 0 s
09 Safety time during operation tSB: 1 s
27 V2 during burner operation: On
08 Behaviour in the event of flame failure during operation: Restart
02 Burner switch-off threshold: 1 micro A
17 UVS check (1 x in 24 hours): Off
16 Operating time in Manual mode: limited to 5 minutes: Yes
30 User-defined password: ----
04 Air monitoring during pre-purge: On
05 Air monitoring during operation: On
23 Min. gas pressure monitoring: Off
24 Digital input function: Inactive
20 Fan run-up time tGV: 2 s
25 Valve control: On
31 Bus control activation: Off
32 Bus control limitation: Low position
06 Pre-purge on each start-up: Off
28 Quick start: Starts in closed position
18 Pre-purge time tPV: 10 s
19 Post-purge time tPN: 0 s
Eigenschaft |
Wert |
Original / Alternative |
Original / genuine (OE) |
Brand |
Reference No. |
Kromschröder |
88600018 |
Kromschröder |
BCU 370WI1FEU0D1B1-3 |