Weld-in protection sleeve, M18x1.5, 7x125mm, 0..400°C, 1.4571
suitable for various engines
Jumo 00340509
909712/50-848-24-125-000-26/000
909712508482412500026000
The weld-in thermowell is used for the installation of thermocouples and resistance thermometers, if, for example, sensor replacement without system emptying and/or pressure resistance is required. The protective sleeve with internal thread M18 x 1.5 (DIN 43763, form D2) is designed for temperatures from 0 to 400 °C. The outer diameter of the protective tube is 24 mm and is stepped down to 12.5 mm. Inside diameter and fitting length are 7 x 125 mm with a total length of the protective sleeve of 200 mm. The dimensions given refer to the thermometers. The material of the protective sleeve is stainless steel 1.4571.
Eigenschaft |
Wert |
Länge / length (mm) |
200 |
Original / Alternative |
Original / genuine (OE) |
Breite / width (mm) |
23 |
Höhe / height (mm) |
23 |