Weld-in protection sleeve, M18x1.5, 7x65mm, 0..500°C, 1.7335
suitable for various engines
Jumo 00102673
909712/51-854-24-65-000-36/000
90971251854246500036000
The weld-in thermowell is used for the installation of thermocouples and resistance thermometers, if, for example, sensor replacement without system emptying and/or pressure resistance is required. The protective sleeve with internal thread M18 x 1.5 (DIN 43763, form D4) is designed for temperatures from 0 to 500 °C. The outer diameter of the protective tube is 24 mm and is stepped down to 12.5 mm. Inside diameter and fitting length are 7 x 65 mm with a total length of the protective sleeve of 200 mm. The dimensions given refer to the thermometers. The material of the protective sleeve is steel 1.7335.
Eigenschaft |
Wert |
Länge / length (mm) |
200 |
Original / Alternative |
Original / genuine (OE) |
Breite / width (mm) |
24 |
Höhe / height (mm) |
24 |